Our Products

STANDARD/CUPLOCKS

Scaffolding Cuplocks

Our firm is involved in rendering Scaffolding Cuplock to the clients. These are designed and fabricated by the professionals of our vendors in order to meet their specifications. Moreover, we offer these cuplocks to the patrons in variegated shapes, sizes, and designs in order to suit their requirements. Our offered products are extremely strong that helps in access support.

 

Attributes :

  • Resistant to corrosion, heat, and harsh weather conditions
  • Easy to install
  • Longer life

Cuplocks are available in different sizes which are given below:

  • 0.5 meter, 1.0 meter, 1.5 meter, 2.0 meter, 2.5 meter, 3 meter

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

HORIZONTAL LEDGER

Scaffolding Ledger

Ledgers are made of 40 NB “B class pipe” with forged ledger blades that are welded at the ends which locate into bottom cups of the Vertical and are locked in place by the corresponding top cups.

The length of the ledger is calculated between center to center of two verticals.

Attributes :

  • High durability
  • Corrosion resistance
  • Ability to handle tones of loads

Ledgers are available in different sizes which are given below:

  • 1.0 meter, 1.2 meter, 1.5 meter, 1.8 meter

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

CLAMPS

Scaffolding Clamps

  • M.S. Fixed Coupler
    • It is used for joining 40 NB pipes at a 90-degree angle to other 40 NB pipes, ledgers, or props.
  • M.S. Swivel Clamp
    • It is used for connecting 40 NB pipes at any angle to other 40 NB pipes, ledgers, or props for diagonal bracings.

 

Attributes

  • Clamps are compatible with Safway® standard scaffold frames
  • Only four basic parts are needed for assembly
  • Ability to handle tones of loads
  • Clamps fasten to both 1.90″ outer diameter (OD) and 1.69″ OD tubing
  • Steel tubing is durable, lightweight and high-strength
  • Tubing and clamps are galvanized to reduce rust and corrosion for a longer product life

The clamps are available in the following sizes:-

  • 40 NB x 40 NB
  • 40 NB x 50 NB

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

CHALLI

Scaffolding Challi

 

Challis/ Jali/ Platforms are widely used in the new construction, as it speeds up work in high areas by allowing more than one worker on the platform, and providing a place to handle materials.

Some of the attributes of chali systems are as follows:

  • Resistance to corrosion
  • Capacity to withstand high pressure
  • Lesser maintenance

Available Sizes:

6 ft. X 1.5 ft

 

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

BASE JACK

Scaffolding base Jack

 

Adjustable Base Jack/ Base plates are used to secure the pipe/ cuplock to the ground. It is used for the precise rise of pipe especially on uneven surfaces. The offered base jacks are widely used to level up and down the vertical standards at the construction sites. In order to meet the needs of varied customers, we offer these base jacks in variegated shapes and designs.

Attributes:

  • Sturdy construction
  • Corrosion & abrasion resistant
  • Dimensionally accurate

Base Jack Sizes Available:

350 mm to 450 mm

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

U JACK

Scaffolding U Jack

Adjustable U-Jacks/ Stir-up Heads are used for supporting floor forms, slab & beams. It has a jack nut that provides for accurate adjustment and it has a solid stem. We offer these products to the customers in variegated shapes, sizes, and designs in order to meet their needs.

Attributes:

  • Resistance to corrosion
  • Strong construction
  • Lesser maintenance

U Jack Sizes Available:350 mm to 450 mm

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

SPIGOT / JOINT PINS

Scaffolding Joint Pins

Spigot pin is used as an internal vertical to the vertical jointer. Though small in size, they are an extremely important part of the scaffolding system as they are required to support multiple stories of scaffolding. These pins fitting services are offered by us for the construction of safe and secure scaffoldings for various sites. Our rendered services are executed under the supervision of professionals following international standards.

Attributes

  • Strong construction
  • Low maintenance cost
  • Durability

Specifications:

  • Fittings: 40 mm pipe
  • Hollow pipe of dia: 38 mm
  • Length: 14 inch & 18 inch

NoteAvailable on rent and hire for construction of residential, commercial, and industrial sites

 

M.S PIPES/ BRACING PIPES

Scaffolding MS PipesThe quality of these products is excellent for which these are widely demanded across various sectors. Our pipes are made using premium quality raw material and cater to the demands of various industries. These pipes are highly used in textile, chemical, and petroleum. It is made of 40 NB “B Class pipe”.

Features:

  • Dimensionally accurate
  • Corrosion-resistant
  • Fine finish
  • Strong construction

Available MS Pipes Sizes: Upto 6 Meters

NoteAvailable on rent and hire for construction of residential, commercial, and industrial sites

STEEL PLATES

Shuttering Steel Plates

The shuttering plate is made of a high-quality 3mm sheet with a 35×5 mm steel angle. It is watertight shuttering which can bear the load of cement concrete placed on it. It can be used for horizontal, vertical, or any other shape required for the work. It gives a leveled surface which has a good appearance. If the plaster is required, the thickness of the plaster will be less. Being watertight, the strength of concrete with steel shuttering is comparatively higher.

Advantages

  • Steel plates are stronger, durable, and have a longer life than timber formwork and their reuses are more in number.
  • Steel plates can be installed and dismantled with greater ease and speed.
  • The quality of exposed concrete surface by using steel plates is good and such surfaces need no further treatment.
  • Steel plates do not absorb moisture from concrete.
  • Steel plates do not shrink or warp.

MS Plates are available in the following sizes:-

  • 2′ x 3′ (600 x 900 mm)
  • 9″ x 3′ (230 x 900 mm)
  • 1′ x 3′ (300 x 900 mm)
  • 15″ x 3′ (375 x 900 mm)
  • 18″ x 3′ (450 x 900 mm)
  • 1.5’x 4′ (450 x 1200 mm)

NoteAvailable on rent and hire for construction of residential, commercial, and industrial sites

TELE PROPS

Tele Props

Tele Props or Prop Jack Material is considered as one of the ideal, most economical & most reliable methods of support for all kinds of formwork, slabs, beams, walls, and columns. They are also required for a wide variety of applications in general construction and repair work.  Adjustable Props are specially engineered with a threaded external tube, internal tube, and intermediate holes so that the prop can be extended to a desirable size.

Advantages

  • Easy to install
  • Reusable
  • Can be extended to the desired length
  • Eliminate labor work
  • Precise structure
  • Excellent durability
  • High strength

Prop Jack materials are available in the following sizes:-

Length of Members Height Adjustment
Size Outer in Mtrs. Inner in Mtrs. Closed in Mtrs. Extended in Mtrs.
2×2 2 2 2 3.5
2×3 2 3 3 4.5
3×3 3 3 3 5.5
  • The outer member made of 50 NB “B class pipe”
  • The inner member made of 40 NB “B class pipe”

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

MS CHANNELS

MS Channels

A channel is a right angle “C” section. They are also called C Channels. Along with beams, channels are mainly used in structural applications. M.S. Channels are used to support steel plates or floor from below. It is fixed on top of the Adjustable Props/ Cuplock system. To meet the customers’ needs, we offer these metal channels in variegated lengths, diameters, and thicknesses.

Features:

  • Rugged construction
  • Dimensionally accurate

Specifications:

  • Grade: SS400,A36,ST52,Q235
  • Size: 50*37mm-400*104mm
  • Length: 6m-12m
  • Dimensions: 50*37*4.5mm, 400*104*14.5mm

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

 

 

ACRO SPAN

Acrow Span

Acro Span’s materials are ideal to be used as a self – supporting runner in shuttering systems. Moreover, Adjustable Beam spans are installed under shuttering plates or floor from panels. Acrospan shuttering materials have a standardized size i.e. 2.5 x 2.5 meter (2350 x 2350 mm)

Advantages

  • Portable
  • Highly Accurate and precise
  • Easy handling
  • Installation is easy
  • High load-bearing capacity

Specifications:

  • Available Sizes: 2.5 meter X 2.5 meter
  • Lattices: 10 mm diameter bar
  • Main bar: 14 mm diameter
  • Bearing angle: 75x75x10 mm
  • Eye bolt

Note: Available on rent and hire for construction of residential, commercial, and industrial sites

Let's get the best quote today!

Available on rent and hire for construction of residential, commercial, and industrial sites

CONTACT US

Main Pakhowal Road, Lalton Chowk,
Near Soni Dental Hospital and Implant
Opp Lalton Hospital,
Ludhiana Punjab – 141008

Call Us:
+91-9803491500, 9915594242, 9780768825, 8968564242

Email Us:
info@pmscaffoldings.com, shuttering.pm@gmail.com

Follow us at

Connect on Whatsapp

Copyright © Prabh Mehar Shuttering & Scaffoldings

Design & Developed by Maxxmann Communications